Plastic mufflers, breathers and silencers are all offered by Pneuline Supply. Whether you’re trying to muffle sound outward or filter air or fluid inward. We got you covered!
-
This is a Breather with a 40 micron screen. The housing is made of ABS plastic. This unit is cleanable. Optional screen of 30, 60, or 120 micron porous plastic available. 3/8” NPT only.
-
This is a plastic Muffler with optional Brass, Polyethylene or Stainless Steel element. The sizes available are 1/8”, 3/8”, 1/2", 3/4” and 1” Male NPT threads. Also available in a slim version. The unit is cleanable and can be used as a Muffler or Filter.
-
Slim profile plastic Muffler with optional Brass, Polyethylene or Stainless Steel element. The sizes available are 1/8”, 3/8”, 1/2", 3/4” and 1” Male NPT threads.
-
The CMPM Series is a plastic muffler with a molded acetal body and provides efficient noise reduction and filtering. The MNPT sizes available are: 1/8 inch, 1/4 inch, 1/2 inch, and 3/8 inch. The 1/4 inch unit can be modified to 1/8 inch FNPT or FNPS threads.
-
The MTM Series Muffler Breather is made of Glass-Filled Nylon. This series is available in 1/8 inch and 1/4 inch MNPT threads, both with a 10 micron element.
-
The NMP Series high-flow Muffler is made of Glass-Filled Nylon with a 40 micron sintered bronze screen. It is available with MNPT threads of 1/8 inch, 1/4 inch, and 3/8 inch. The maximum working pressure is 150 psi and the working temperature range is 35˚ F to 120˚ F.
-
This high-flow Muffler is made of Glass-Filled Nylon with a 50 mesh Stainless Steel screen. It is available with Male NPT threads of 1/8”, 1/4", 3/8” and 1/2"
-
The PTV Series is a Polyethylene breather with a 60 micron Polypropylene filter. The maximum pressure for this unit is 100 psi and the maximum temperature is 150˚ F. MNPT sizes are 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch. These breathers can be cleaned with mineral spirits.
-
Rugged Polyethylene body with a Polyvinyl foam element makes this muffler very effective for noise reduction. This Muffler is resistant to oil and water and can be cleaned with kerosene or other similar cleaning solvents. It is available with male NPT threads of 1/8”, 1/4", 3/8” and 1/2”. The working pressure is 130 psi and the temperature range is 41° F to 140° F.
-
The TS Series mufflers are made of a high density, porous Polyethylene body on a solid Polyethylene base. The base is molded with 1/8 inch, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch MNPT threads. The maximum pressure is 150 psi and the temperature range is 41˚ F to 140˚ F. The TS Muffler is available in four different air flows: 250 microns (green base), 70 microns (black base), 35 microns (red base) and 20 microns (blue base).
