-
These Flow Control Valves made of Aluminum, can be used for air and oil. The maximum working pressure is 250 psi and the temperature range is -40˚F to 250˚F. Sizes available are: 1/4-28 Male/Female and 1/8”, 1/4", 3/8”, 1/2” Female NPT. These valves control flow in one direction with free flow in the opposite direction.
-
4-way Stopcock available in Polycarbonate, Acetal, Polyethylene, HDPE, Acrylic and Silicone. These Stopcocks are chemically resistant and not made with DEHP. Connection options include male luer slip, male luer lock, male luer with spin lock, rotating male luer lock, female luer lock, and tubing ports. Psi is 50, higher pressures are available on request.
-
This is a miniature stopcock made of high-density polypropylene. The key turns easily so no lubricant is needed which eliminates blockage of the bores with grease. This is not for pressurized lines.
-
2-way non-exhausting Air Regulator is made of Electroless Nickel Plated Brass with a small knurled knob and is panel mountable. The input port can be 10-32 male or female threads; 1/16”, 3/32” and 1/8” Barb; 1/8” Female NPT or 1/4-20 Female threads. The outlet port can be 10-32 male or female threads or 1/16”, 3/32” or 1/8” Barb. The panel mount threads are 15/32-32. The maximum operating pressure is 5 to 80 psi and the maximum operating temperature is 180˚ F. 3-way exhausting is also available.
-
This non-relieving Regulator is made of NSF and FDA approved Acetal with Stainless Steel and food grade EPDM elastomer. It has 1/4" female NPT inlet and outlet ports. It can be used for potable and deionized water. There is an adjustable pressure knob. The maximum pressure is 150 psi and the temperature range is 35˚ F to 125˚ F. There is an available regulator for compressed air and non-potable water.
-
Electroless Nickel-plated Brass push-button Relief Valve is corrosion resistant. The operating pressure is 0 to 125 psi. Releases pressurized air at a rate of 100 inᵌ in 4 seconds. Available in NPT or UNF threads.
-
RA Series are precision relieving regulators made of a Polysulfone body with EPDM seals, Stainless steel springs. 150 PSI maximum input with a 24 turn adjust allows settings to 1 Inch WC. Available with threads of 10-32 Female or 1/8 inch NPT. These non-relieving regulators can be purchase in a low profile preset design with pressure ranges are 3.5, 10, 30, 60, or 90 psi. Optional with a standard screwdriver slot adjustment. Can be purchased as a reliving regulator. Used for robotics, medical equipment, and process control applications.
-
1/8” or 1/4" 4-port mini air Regulator made of glass-filled Nylon with Buna-N seals. The supply pressure is 250 psi with a standard operating range of 5 – 125 psi, 3 – 60 psi and 3 – 20 psi. The temperature range is 40˚ F to 120˚ F. It has a 3-position non-rising adjustment knob which can be detached to make it tamper resistant. Also, a tamper-proof cap is included. This unit is lightweight, panel-mountable and the relieving style is standard.
-
This Pressure Regulator is made of NSF approved Acetal with port sizes of 1/4" (R25) and 3/8” (R45). Both have 1/4" gauge port threads. The maximum supply pressure is 125 psi and the temperature range is 40˚ F to 125˚ F. The spring pressure ranges are 0-25 psi, 0-60 psi and 0-125 psi. This Regulator is recommended for compressed air. The 1/4" regulator is relieving and the 3/8” is non-relieving.
-
Water Pressure Regulator made of NSF approved Thermoplastics with FDA grade EPDM disc, Buna-N diaphragm and seals. It has a straight through or 90˚ inlet to outlet option and a clean out plug on the bottom. The temperature range is 33˚ F to 150˚ F and the maximum operating pressure is 300 psi. The inlet and outlet sizes are 1/4" and the regulator can have either 2 or 4 outlets.
-
Brass Relief Valve with 1/8” male NPT threads and side exhaust. Maximum working pressure of 150psi.
-
This is a vent-to-atmosphere Relief Valve. It is an accurate design that offers repeatability and dependability. Cracking pressure is set and tested for accuracy. Male NPT threads in 1/4”, 3/8” and 1/2” sizes. Maximum pressure is 200 psi. Made of Nickel-plated Brass, 303 Stainless Steel and Brass. Optional dust cover is available.
